![]() ![]() In addition, glass and ceramics manufacturers choose to work with Shepherd Color because of our products' high temperature and thermal cycle stability.Īt Shepherd Color, we don’t settle for less than perfection. We do our best to ensure our products don’t fade and are stable options for concrete applications. More specifically, our inorganic pigments are often used in vinyl siding, window and door profiles, composite decking, and more. PAINTS AND COATINGS | PLASTICS | CONCRETE | GLASS & CERAMICSĪs a leading pigment manufacturer, Shepherd Color’s inorganic pigments are used in paints and coatings for architectural coatings, building and construction. Our goal is to see our pigment powders used in diverse applications and markets including: We work to continually earn new relationships with customers across the globe. Our complex inorganic color pigments are intentionally designed to serve diverse applications – especially where performance is critical. ![]() Make sure to follow the instructions on the can.For more than 90 years, Shepherd Color has been proud to be a world-class pigment manufacturer and supplier for a diverse customer base. Let the final coat to cure 5 days before filling pool with water. Applying too thick a coat or excessive coats can result in paint blistering. Apply the second coat, unthinned, keeping the coat as close to the recommended spread rate as possible. Apply one coat of pool paint that has been thinned with one pint of clean water per gallon of paint and allow it to dry for 4-6 hours. Applying the paint too heavily will cause premature pool paint failure. Two thin coats are recommended rather than one heavy coat. Do not use a long nap roller as it will cause chalking, blistering and put too much paint on the surface. If painting by roller, you the manufacturer says you must use a 3/8” nap or less lambskin roller. You can apply Apply Benjamin Moore’s Insl-x® epoxy pool paint by brush, roller or spray. Stir your paint properly before applying it. ![]() Pools that have been painted with water thinned cement type paint must be sandblasted. These areas tend to accumulate the greatest amount of floating oils residue and other contaminants including suntan lotions and dirt. Pay special attention around the water line (top 2 feet of pool) and any steps which are to be painted. It is best to wash all surfaces with a citrus based degreaser/cleaner. If you do not clean the surface properly the paint may not adhere. Experts say the pool surface to be painted must be free from all oil, grease, wax, dust, dirt, mildew, suntan oils, and any other foreign contaminant. Use a pressure washer if possible, however, only use the low pressure setting to avoid damaging you pool’s surface. This paint may also be used on bare concrete, marcite, gunite and other masonry surfaces in sound condition.īefore getting started, scrap away loose paint and fill in cracks or hollow spots with proper patching material. Swimming Pool Painting Tipsīenjamin Moore’s Insl-x® epoxy pool paint is a waterborne acrylic emulsion pool paint that can be applied over most existing pool paints in good condition. Before you get started with your swimming pool project, there are a few things you need to keep in mind. Painting your pool can be a quick and affordable way to give it a new fresh look. Right now is the perfect time to paint your swimming pool so it will be ready when it gets hot outside. Summer is right around the corner and temperatures are on the rise. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |